Main Discussion Area > Muzzleloaders
Christian Springs Rifle
Mike Yancey:
Ramrod grove done and hole drilled.
Mike Yancey:
Ramrod made and tapered, got the tip on and pinned. Now Ill cut the dovetails in the barrel and pin to the stock.
Mike Yancey:
Done for the day, I got the three barrel lugs dovetails cut and installed.
Mike Yancey:
Got the barrel pinned to the stock and some shaping done on the front end. Lock inlet next.
Guys I'm far from being a gun a gun builder. I just enjoy doing it and sharing the progress as I go along, so enjoy it if you want but don't take it as gospel.
Pat B:
Thanks for taking us through the process, Mike. Passing on info is what it's all about. :OK
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version