« previous next »
Pages: [1]

Author Topic: heat treating board bows on a stove  (Read 1102 times)

0 Members and 1 Guest are viewing this topic.

Offline StickMark

  • Member
  • Posts: 293
heat treating board bows on a stove
« on: September 25, 2018, 08:21:47 pm »
Any thoughts on heat treating a hickory board vs a stave are welcome.  I ask because I heat treated a 68 inch bow, and am needing to heat treat again after some removal of wood.  Bow only drawn 16 inches, btw.  I am learning. :D
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,523
Re: heat treating board bows on a stove
« Reply #1 on: September 25, 2018, 09:53:30 pm »
Forget heat treating for now and take time to learn to properly tiller a bow. Once you get that there is a multitude of ways you can go, heat treating including.
 Hickory, whether board or stave is very strong in tension so any increase in compression strength is a good thing but there are also other methods of design and construction that can also decrease the compression stresses.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline StickMark

  • Member
  • Posts: 293
Re: heat treating board bows on a stove
« Reply #2 on: September 25, 2018, 10:21:11 pm »
thx Pat.  Just took the bow off the stove, lightly treated, lol.  Proper tiller, that is my new goal.  The search thread material about being careful about the initial brace really got me thinking. 
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: heat treating board bows on a stove
« Reply #3 on: September 26, 2018, 06:32:06 am »
I agree with Pat.
Kiln dried boards have been heat treated?
More on my site.
Jawge

http://traditionalarchery101.com
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: [1]
« previous next »