« previous next »
Pages: 1 [2] 3

Author Topic: Red Oak 1x3  (Read 7296 times)

0 Members and 1 Guest are viewing this topic.

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Red Oak 1x3
« Reply #15 on: December 14, 2018, 03:45:22 pm »
Quote from: IrishJay on December 14, 2018, 03:39:52 pm
I rip cut the board down to 2" wide last night and glued and clamped the riser block. I'll probably shape the handle and cut the taper into the limbs either tomorrow evening or Sunday morning. So should I go true pyramid pr semi-pyramid? Keeping in mind that 2" width has already been cut.

User preference, imo.
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Red Oak 1x3
« Reply #16 on: December 14, 2018, 04:23:09 pm »
Correction due to "senior moment" re my preferred handle thickness.   :-\
1.25 to 1.5" . . . not 1".    O:)
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline bubby

  • Member
  • Posts: 11,054
Re: Red Oak 1x3
« Reply #17 on: December 15, 2018, 09:57:55 pm »
Red oak board, 2" at the fades, I think I posted the specs a while back. Pyramid design is a great one for a board bow. I have a build a long in the how to section
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bubby

  • Member
  • Posts: 11,054
Re: Red Oak 1x3
« Reply #18 on: December 15, 2018, 09:58:37 pm »
Wrong pic I'll fix that
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bubby

  • Member
  • Posts: 11,054
Re: Red Oak 1x3
« Reply #19 on: December 15, 2018, 10:00:41 pm »
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline IrishJay

  • Member
  • Posts: 442
Re: Red Oak 1x3
« Reply #20 on: December 16, 2018, 12:30:54 pm »
I went with the true pyramid. Will be doing some handle shaping and edge radiusing today, then onto tiller. The other 2 staves in the pic are black cherry, both roughed out from the same log today.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Red Oak 1x3
« Reply #21 on: December 17, 2018, 11:23:00 am »
Good. Have fun. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline IrishJay

  • Member
  • Posts: 442
Re: Red Oak 1x3
« Reply #22 on: December 19, 2018, 07:53:16 pm »
Been sick for a few days which has slowed my progress, but I got back into the shop for a while this evening. Finished up the handle and the tip overlays. Tomorrow's goal is to do some sanding on the limbs, cut in the nocks and get it on the tillering rig.

Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline IrishJay

  • Member
  • Posts: 442
Re: Red Oak 1x3
« Reply #23 on: December 20, 2018, 06:37:22 pm »
Linen backing applied, tomorrow I tiller.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Red Oak 1x3
« Reply #24 on: December 20, 2018, 06:54:57 pm »
I allow at least 48 hours in the house for moisture introduced by backing process to move out of the limbs.
Good luck!
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline bubby

  • Member
  • Posts: 11,054
Re: Red Oak 1x3
« Reply #25 on: December 20, 2018, 09:45:36 pm »
I find it's better to tiller first, then do the handle shaping
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline IrishJay

  • Member
  • Posts: 442
Re: Red Oak 1x3
« Reply #26 on: December 21, 2018, 09:51:46 am »
Linen on one limb sanded

Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline IrishJay

  • Member
  • Posts: 442
Re: Red Oak 1x3
« Reply #27 on: December 21, 2018, 05:09:33 pm »
Makin' shavin's! I had it braced, but it was a little uneven (top limb stiff) so I didnt want to leave it that way long enough for a pic. More to come after dinner. One question I should have thought to ask before hand. Is 8" brace height about right? Bow is 70" over all, 68" ntn, using an AMO 68" string.

Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline TimBo

  • Member
  • Posts: 1,047
Re: Red Oak 1x3
« Reply #28 on: December 21, 2018, 05:29:16 pm »
Eight inches, assuming you are measuring from string to deepest part of grip, is pretty high for a self bow even when it is closer to finished.  For now I would do less, maybe a lot less if you have a ways to go on weight/tiller.
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Red Oak 1x3
« Reply #29 on: December 21, 2018, 05:33:22 pm »
That's to the belly of the limbs right at the fades, I had a brain fart and didnt even think to measure to the handle.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear
Pages: 1 [2] 3
« previous next »