« previous next »
Pages: [1] 2

Author Topic: Osage Static Recurve  (Read 4482 times)

0 Members and 1 Guest are viewing this topic.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Osage Static Recurve
« on: January 04, 2019, 06:09:31 pm »
Worked all day on this static recurve.  This one lined up tip to tip pretty good for what I started out with. 
Did some steaming of the statics and used dry heat to add in the deflex.  I'll trim the tips once I get it to about 27" draw.  I'll cut the tips back so the string just lifts off the limb about 2" from full draw.  Will most likely add some sinew and add a turkey feather backing over the sinew.
This one is targeted for
55# @ 29"
62" ntn
Hopefully more to come,
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Osae Static Recurve
« Reply #1 on: January 04, 2019, 06:10:33 pm »
A few more...
Logged
Integrity is doing the right thing when no one is looking

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Osage Static Recurve
« Reply #2 on: January 04, 2019, 06:12:29 pm »
The temp in my shop started out at 61 and the RH at 35% .  The steaming added a little...…:)
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline bjrogg

  • Member
  • Posts: 10,861
  • Cedar Pond
Re: Osage Static Recurve
« Reply #3 on: January 04, 2019, 06:16:49 pm »
That one is gonna be nasty Bill.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Osage Static Recurve
« Reply #4 on: January 04, 2019, 06:21:13 pm »
Thanks BJ.....
I'm expecting the RH will get down to about 20-25% by Feb...... it has the last few years, Ill be ready to add the sinew then. Im only adding two courses of sinew with a thick course down the middle, so hopefully by the end of March, it will be dry enough to add the feather backing at the Outlaws place.
This one may take some time I just hope it finishes.
Thanks DBar
Logged
Integrity is doing the right thing when no one is looking

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Osage Static Recurve
« Reply #5 on: January 04, 2019, 06:22:07 pm »
Now those are some hooks! Lookin awesome so far.  :OK

 (-P
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: Osage Static Recurve
« Reply #6 on: January 04, 2019, 06:25:22 pm »
I can't wait to see that one in person Bill. 
Logged
I started out with nothin' and I still got most of it left

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,530
Re: Osage Static Recurve
« Reply #7 on: January 04, 2019, 06:36:16 pm »
That's gonna be a screamer, Bill. Can't wait to see the finished product.  :OK
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PNewton

  • Member
  • Posts: 400
Re: Osage Static Recurve
« Reply #8 on: January 04, 2019, 07:14:05 pm »
Looking good Bill.
Logged

Offline Bayou Ben

  • Member
  • Posts: 661
Re: Osage Static Recurve
« Reply #9 on: January 04, 2019, 07:41:29 pm »
Yeah that’s looking real nice.  Do you think sinew is necessary or more for assurance?
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Osage Static Recurve
« Reply #10 on: January 04, 2019, 11:26:42 pm »
thats looking great,, nice profile (SH)
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Osage Static Recurve
« Reply #11 on: January 05, 2019, 06:29:17 am »
Ben,  JMO  ;)
At 62" ntn, 29" draw, static it can be done without sinew.  But, I want a long lasting bow that can be shot with confidence every time it is drawn back.  Each limb only has about 24" of working limb.
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Osage Static Recurve
« Reply #12 on: January 05, 2019, 07:00:00 am »
Great start Bill.   What do you use the toaster oven for?
Logged

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Osage Static Recurve
« Reply #13 on: January 05, 2019, 07:10:53 am »
Heck of a nice start and piece of osage Bill.Look forward to seeing the results and finish.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Badger

  • Member
  • Posts: 8,119
Re: Osage Static Recurve
« Reply #14 on: January 05, 2019, 08:18:34 am »
       It wouldn't surprise me if you don't hit the 240 yard mark at mojam. Looking forward to seeing this bow finished!
Logged
Pages: [1] 2
« previous next »