Main Discussion Area > HowTo's and Build-a-longs

How I repair self nocks

<< < (2/4) > >>

DC:
Rough sanded on the belt sander. (Couldn't get any pics) and finished with sanding sticks.

DC:
Wrapped with upholstery thread and thin CA.

DC:
Then I chucked it up in the lathe(use a drill if you don't have a lathe) and put on a coat of 5 min epoxy. Turn until cured and shiny.

DC:
Finished

Pat B:
Now you have a footed nock on that arrow too.  Nicely done.   :OK

Navigation

[0] Message Index

[#] Next page

[*] Previous page