Author Topic: Rivercane shaft Obsidian point  (Read 3992 times)

0 Members and 1 Guest are viewing this topic.

Online bjrogg

  • Member
  • Posts: 10,732
  • Cedar Pond
Rivercane shaft Obsidian point
« on: January 20, 2020, 01:05:12 pm »
I got the rivercane from a trade with Trapper Rob. I really like this stuff for arrows. Straightens nicely and seems to stay straight.

Got the Obsidian as a gift from Paulsemp. A pretty piece of tri flow Obsidian I knapped into a nice hunting point.

I halved it onto the shaft with a little jbweld and white tail sinew.

I have a bit of trouble getting glue to hold fletching on these rivercane shafts so I spiral wrapped them with white tail sinew.

This one is going in my hunting quiver.

Bjrogg


A hot cup of coffee and a beautiful sunrise

Online bjrogg

  • Member
  • Posts: 10,732
  • Cedar Pond
Re: Rivercane shaft Obsidian point
« Reply #1 on: January 20, 2020, 01:06:32 pm »
Couple more
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline backtowood B2W

  • Member
  • Posts: 574
Re: Rivercane shaft Obsidian point
« Reply #2 on: January 20, 2020, 01:33:17 pm »
That's a beautiful arrow! I like your cresting.
I put my best stone points to the arrows which never flew good. Collect em and when I have enough maybe as a wallhanger. Mine are far away from hunting quality so better like this....
Wish you a good hunt with this one!

Online bjrogg

  • Member
  • Posts: 10,732
  • Cedar Pond
Re: Rivercane shaft Obsidian point
« Reply #3 on: January 20, 2020, 01:39:12 pm »
Thanks BTW. I'm still looking for that stone point kill. I should have it but it wasn't to be. No fault of the arrow. It was all me. I'm really hoping next season. I didn't get much hunting this past season.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Trapper Rob

  • Member
  • Posts: 3,718
Re: Rivercane shaft Obsidian point
« Reply #4 on: January 20, 2020, 05:31:38 pm »
Looks really good BJ.
I have the same problem with fletching.

Online bjrogg

  • Member
  • Posts: 10,732
  • Cedar Pond
Re: Rivercane shaft Obsidian point
« Reply #5 on: January 20, 2020, 06:11:24 pm »
Thanks Rob. Sometimes I think I had about the best luck with regular Elmer's School glue.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline chamookman

  • Member
  • Posts: 2,971
Re: Rivercane shaft Obsidian point
« Reply #6 on: January 21, 2020, 02:19:28 am »
Nice  (=) ! Bob
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.

Offline Wolfmanjack

  • Member
  • Posts: 82
Re: Rivercane shaft Obsidian point
« Reply #7 on: January 21, 2020, 06:05:55 am »
 To get the feather to adhere to the cane shaft you have to scrape off the outer layer of the cane.  I’m not sure what the proper name is but it’s the shiny layer.  I wrap my feathers with fine sewing thread then use very small dabs of gorilla super glue.  Once set I remove the thread and the feather is rock solid on the shaft.

Offline Swampman

  • Member
  • Posts: 1,037
  • Primitive Archer subscription number PM109299
Re: Rivercane shaft Obsidian point
« Reply #8 on: January 21, 2020, 06:39:47 am »
That is a beautiful arrow.  Very nice work on that one. 

gutpile

  • Guest
Re: Rivercane shaft Obsidian point
« Reply #9 on: January 21, 2020, 01:00:01 pm »
I don't scrap off rind on cane when applying feathers.. I peel mine..coat shaft with hide glue and wrap feather on with sinew... Ive never had a feather detach...

Offline TimBo

  • Member
  • Posts: 1,029
Re: Rivercane shaft Obsidian point
« Reply #10 on: January 21, 2020, 01:41:38 pm »
That is a really colorful arrow, point included.  Nice work!

Online bjrogg

  • Member
  • Posts: 10,732
  • Cedar Pond
Re: Rivercane shaft Obsidian point
« Reply #11 on: January 21, 2020, 07:15:41 pm »
Thanks everyone. I don't think these fletchings are falling off. They seem tight. I have lost a couple from the cane before though. Could have been my glue. I do usually scuff up the shiny rhin .
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Chief RID

  • Member
  • Posts: 684
Re: Rivercane shaft Obsidian point
« Reply #12 on: January 22, 2020, 04:00:14 am »
A decorative piece like that and flies good is a gem. Good luck with your hunt next season.

Online bjrogg

  • Member
  • Posts: 10,732
  • Cedar Pond
Re: Rivercane shaft Obsidian point
« Reply #13 on: January 22, 2020, 06:00:13 am »
Thanks Chief
A hot cup of coffee and a beautiful sunrise

Offline Todd Mathis

  • member
  • Member
  • Posts: 75
Re: Rivercane shaft Obsidian point
« Reply #14 on: January 29, 2020, 07:53:01 pm »
I got the rivercane from a trade with Trapper Rob. I really like this stuff for arrows. Straightens nicely and seems to stay straight.

Got the Obsidian as a gift from Paulsemp. A pretty piece of tri flow Obsidian I knapped into a nice hunting point.

I halved it onto the shaft with a little jbweld and white tail sinew.

I have a bit of trouble getting glue to hold fletching on these rivercane shafts so I spiral wrapped them with white tail sinew.
Love the arrow!  How does it fly?

This one is going in my hunting quiver.

Bjrogg