Main Discussion Area > At the Forge

Small Adze

<< < (2/2)

DC:
I like that :D. When you watch bow making videos you see a lot of traditional makers using adzes but you rarely see any modern guys using them. I've often thought that they would work better than a hatchet but I have no reason for that. Is there a steep learning curve or are they much like a hatchet to use? Is the amount of curve in the blade critical or do you just adjust the hitting angle to make it work?

Handforged:

--- Quote from: DC on March 18, 2020, 10:04:09 am ---I like that :D. When you watch bow making videos you see a lot of traditional makers using adzes but you rarely see any modern guys using them. I've often thought that they would work better than a hatchet but I have no reason for that. Is there a steep learning curve or are they much like a hatchet to use? Is the amount of curve in the blade critical or do you just adjust the hitting angle to make it work?

--- End quote ---

an adze really shines when you have a good amount of wood to remove. They are handy for chunking off large sections. After that it really depends on your skills with one. I have seen people that could take a bow stave down to scribed lines with one pretty easily. The angle on them is purely subjective. I have seen the with as much as 60 degrees of downward angle, they are all made for a specific task. I make mine with about 40 degrees of angle at the cutting edge from the handle. That keeps the blade on a straighter plane on the downward stroke. A straight blade version like this one works the same as a hatchet. You work the wood facing it as opposed to along the side.   As far as learning curve, its not rocket science but I would want to practice a little on some pine or cheap scrap to get the feel for it. Then go on with your bow building.

Hawkdancer:
Nice work!  If I remember correctly, it was a very good shaping tool back in the day, and a every carpenter had at least one.   I think I even got to try one at a Scout outing way back when.  They have gone by the wayside with the advent of bandsaws and power sanders!  If I see one at a sale, it will follow me home!  Of course, I would be open to trading for a new one (f) (lol) >:D!
Hawkdancer

High-Desert:
This is really cool! Haven’t tried an adze, but it does look like it would work well for roughing out a stave

Handforged:

--- Quote from: High-Desert on March 18, 2020, 03:18:08 pm ---This is really cool! Haven’t tried an adze, but it does look like it would work well for roughing out a stave

--- End quote ---

The truth of it is I make them and don't have one for myself. After fiddling with this one that might need to change. What's old saying about mechanics' vehicles rarely run correctly, electricians have light bulbs out in the house....well, blacksmiths get to make the cool toys and send them out the door to someone who will use them. I have at least 20 "I should make myself one of those" tools in my head. I'll get around to it eventually I guess.

I played with this one this morning with a hammer handle in it and MAN ALIVE...it makes wood move in a hurry! I took out a 2x4 in about 6 good strokes.

Navigation

[0] Message Index

[*] Previous page