Author Topic: 3  (Read 3807 times)

0 Members and 1 Guest are viewing this topic.

Offline Kidder

  • Member
  • Posts: 597
3
« on: August 11, 2020, 09:39:46 pm »
So I just finished bow number 3 (first full size bow). It’s an all hickory longbow. Leather handle wrap. Buffalo horn tip overlays. 68 ttt, 66 ntn. 1.75 inches at the fades straight to 18 inches from the tip beginning a steady taper to 0.5 inch tips. Draws 50lbs at 28 inches. The board I was using was sapwood on the back and heartwood on the belly (with a little heartwood breaking through on the belly of the bottom limb tip. I laminated a heartwood riser on. Finished with 6 coats of tru oil. Wet sanded with 1500 grit paper and buffed with olive oil/bon ami mix (thanks Weylin). It has taken about an inch of total set after two shooting sessions. I’m incredibly happy with how it turned out. It certainly shoots better than I do with no hand shock. But the best part is that I see a couple of flaws, I know how they got there, and what I need to do next time to prevent those same flaws. So I feel like it’s a success. Thanks for looking.
« Last Edit: August 11, 2020, 09:52:58 pm by Kidder »

Offline Kidder

  • Member
  • Posts: 597
Re: 3
« Reply #1 on: August 11, 2020, 09:44:25 pm »
Couple more...
Also many thanks to Flntknp17 for entertaining my constant questions and requests for advice!

Offline Kidder

  • Member
  • Posts: 597
Re: 3
« Reply #2 on: August 11, 2020, 09:46:50 pm »
Tip overlays

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
Re: 3
« Reply #3 on: August 11, 2020, 10:07:00 pm »
Looks great! Very impressive for your 3rd bow!

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: 3
« Reply #4 on: August 11, 2020, 10:09:24 pm »
Nice!  Congratulations!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline Bob Barnes

  • Member
  • Posts: 929
Re: 3
« Reply #5 on: August 11, 2020, 10:18:06 pm »
You did a good job on that one.  The tip overlays, grip leather, and FD tiller show your attention to detail.   :OK
Seems like common sense isn't very common any more...

Offline Sagebrush

  • Member
  • Posts: 151
Re: 3
« Reply #6 on: August 11, 2020, 11:29:47 pm »
Looks outstanding!!!

Offline PaSteve

  • Member
  • Posts: 816
Re: 3
« Reply #7 on: August 12, 2020, 06:13:19 am »
Nice bow. Really like the tip overlays.
"It seems so much more obvious with bows than with other matters, that we are the guardians of the prize we seek." Dean Torges

Offline Morgan

  • Member
  • Posts: 1,028
Re: 3
« Reply #8 on: August 12, 2020, 06:37:31 am »
Very nicely done! Really fantastic job for bow #3. You should be proud!

Offline Eric Krewson

  • Member
  • Posts: 5,311
Re: 3
« Reply #9 on: August 12, 2020, 06:59:58 am »
Quality work, especially the tiller.

Offline Will B

  • Member
  • Posts: 941
Re: 3
« Reply #10 on: August 12, 2020, 09:36:28 am »
Great bend and very nice finish work. I really like the handle wrap and your tip overlays. Well done!

Offline DC

  • Member
  • Posts: 10,396
Re: 3
« Reply #11 on: August 12, 2020, 10:23:15 am »
Good job for number 50 let alone 10 :D

Offline Kidder

  • Member
  • Posts: 597
Re: 3
« Reply #12 on: August 12, 2020, 03:21:00 pm »
Thanks for all the kind words. I certainly couldn’t have done it without the great resource that you all are on this forum!

Offline silent sniper

  • Member
  • Posts: 281
Re: 3
« Reply #13 on: August 12, 2020, 07:39:01 pm »
Excellent work 👍🏻

Offline JW_Halverson

  • Member
  • Posts: 11,847
Re: 3
« Reply #14 on: August 13, 2020, 05:05:19 pm »
Like what I said on Facebook, you weren't kidding with this piece of wood, brother.

Any flaws or errors on this bow are probably pretty minor, but if they serve as lessons for making the next one better, well, another win for you!

Thanks for sharing this sweet bow with us!
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.