« previous next »
Pages: [1]

Author Topic: ERC  (Read 1548 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
ERC
« on: November 02, 2020, 01:11:29 pm »
Does ERC sapwood bend into recurves easily? Maybe compare it to Yew if you can.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: ERC
« Reply #1 on: November 02, 2020, 01:54:53 pm »
It's a juniper and I've seen juniper recurves. I've never tried to bend ERC.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Fox

  • Member
  • Posts: 994
Re: ERC
« Reply #2 on: November 02, 2020, 09:16:51 pm »
I tried....   first recurve went ok... the second one steamed the same amount of time and it totally exploded, not warning, no little splinter... just POP. so maybe steam a really long time? I've also tried dry heat, it didn't move at all with that. 
Logged
Why must we make simple things so complicated?

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: ERC
« Reply #3 on: November 02, 2020, 09:17:37 pm »
mayb splice on to be safe
Logged

bownarra

  • Guest
Re: ERC
« Reply #4 on: November 03, 2020, 01:14:59 am »
I've done a few. No problem if you follow the 'rules' :)
Logged

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: ERC
« Reply #5 on: November 03, 2020, 07:22:51 am »
Definitely use steam.  Dry heat is a no no with erc. 
Logged
Freedom dies one compromise at a time. III%

gutpile

  • Guest
Re: ERC
« Reply #6 on: November 03, 2020, 08:53:47 am »
I got a stave I am going to recurve and sinew back.. I will boil it for 15 minutes per 1/4 inch.. make sure water is boiling before starting timer though... do bend quick as you can all at once... I put a metal strap on belly to help to not lift a splinter .. boiling even longer is not necessary and wont hurt either.. my last recurve I blew on curve by not making sure water was boiling before I set timer... still kicking myself for that one... now I won't dry heat a recurve.. but I have flip tips with dry heat on ERC and it worked fine... gut
Logged

Offline TimBo

  • Member
  • Posts: 1,047
Re: ERC
« Reply #7 on: November 03, 2020, 10:17:59 am »
Getting the water to boil before starting the timer is a good tip.  Make sure you have plenty of water too.  I recently scorched the back of a hackberry bow by boiling it dry, even though I "know better"...those mistakes seem to hurt for a while.
Logged
Pages: [1]
« previous next »