Broadhead's latest victim

[Digital Caveman]

Never done this before, but apparently a 5/16 shaft is no match for a broadhead.  Unfortunately the arrow was part of a new kids set; it was only ever shot twice. 

[WhistlingBadger]

Oh, bummer.  It's funny how non-archers seem to view the "Robin Hood" shot as the ultimate accomplishment, but most of us cringe at the thought of destroying an arrow.  ha ha

[Digital Caveman]

Unfortunately this was not even a Robin Hood.  The small arrow was not in the center, and the broadhead was aimed at nothing in particular.  Also, a Robin Hood is hit in the knock, mine was a lot sloppier. 

[Hawkdancer]

AHA!  A chance to test your skill at arrow making before the demise is discovered, or rectify the OOPS!  Several years ago, I managed to take out 3 red osier shafts with 1 arrow - rather upset me!  Especially since I had them ready to fletch and finish!
Hawkdancer

[Digital Caveman]

Several years ago, I managed to take out 3 red osier shafts with 1 arrow - rather upset me!  Especially since I had them ready to fletch and finish!
Hawkdancer

 

I'd like to see how that happened.  I use plastic knocks so that if I hit the knock I can just replace it, the shaft is generally fine.  That actually just happened the other day.  This was not so neat.

[Hawkdancer]

Unfortunately the pics went to cyberspace when my old phone bit the dust!  No pics, it didn't happen!  Must have been a figment of my imagination!  Basically, I shot too many bare shafts without clearing the target and the last arrow was wonky and went into the target wagging!  Bye, Bye shafts!
Hawkdancer

[gutpile]

" It will KILL"...gut

[Hawkdancer]

Think that is "It will Keal" !
Hawkdancer

[boomhowzer]

What do you have holding the broadhead on the shaft? From here it looks like a piece of 3/8 copper tubing.

[Digital Caveman]

Copper wire, close.

[boomhowzer]

Copper wire, very nice! You wrap it real tight around the tang of the broadhead? Then what do you do with the ends of the wire?