Main Discussion Area > Bows

AZ Ironwood Bow

<< < (15/15)

willie:
I think I understand your concern about thickness tapering the ironwood, if you mean that it might expose more grain runoff in the already wavy ringed ironwood.

if you made a bi-lam with the ironwood belly at 3/16 to 1/4 ", and had a hickory board lam for the back.  you could start with the hickory at any thickness and tiller from the back

 pryamid would require less thickness taper and might be preferable

richgibula:
Thank you willie.

Navigation

[0] Message Index

[*] Previous page