Main Discussion Area > Bows

Character hickory bow “tiger”

<< < (3/5) > >>

superdav95:

--- Quote from: Aaron1726 on June 15, 2023, 08:27:12 pm ---Thats awesome.  I love that tiger stripe look on the back, how did you accidentally get that?

--- End quote ---

Thanks Aaron.   Ya I was trying to get the opposite of this effect and have the dark dye down in the low spots of the bow but got the reverse I then tried to rub it off and start over but liked the effect it had left so I went with it.  The toasted Color of the back is left over from the cook as it was a darker roast then usual.  I used leather dye and applied it with a rag and rubbed it hitting the high points.   Thanks for checking it out. 

airkah:

--- Quote from: superdav95 on June 15, 2023, 10:59:36 pm ---
--- Quote from: airkah on June 15, 2023, 07:25:02 pm ---Really nice bow! It looks incredibly quick! How long is it? What is the unbraced profile like?

--- End quote ---

Many thanks Airkah!    Very kind.  I’ll post a couple pics of the reflexed profile.  I’ll repost couple more with daylight tomorrow.  It’s holds about just around 4” give or take.  It is 68.5” long and 1 3/8” at widest point.  Tips very narrow to reduce as much weight as possible.  Every time I shoot this thing I half expect it will blow up but so far so good. It’s mass is just under 600grams. 
Thanks for looking.

--- End quote ---

Absolutely brilliant. I'm confident if I tried to pull that design off it would blow up lol.

You really have a talent for these high performance bows.

M2A:
Real nice looking unstrung limb profile especially with it being as narrow as it is. Great looking piece of work.
Mike     

superdav95:

--- Quote from: airkah on June 16, 2023, 12:51:31 am ---
--- Quote from: superdav95 on June 15, 2023, 10:59:36 pm ---
--- Quote from: airkah on June 15, 2023, 07:25:02 pm ---Really nice bow! It looks incredibly quick! How long is it? What is the unbraced profile like?

--- End quote ---

Many thanks Airkah!    Very kind.  I’ll post a couple pics of the reflexed profile.  I’ll repost couple more with daylight tomorrow.  It’s holds about just around 4” give or take.  It is 68.5” long and 1 3/8” at widest point.  Tips very narrow to reduce as much weight as possible.  Every time I shoot this thing I half expect it will blow up but so far so good. It’s mass is just under 600grams. 
Thanks for looking.

--- End quote ---

Absolutely brilliant. I'm confident if I tried to pull that design off it would blow up lol.

You really have a talent for these high performance bows.

--- End quote ---

Thanks again

superdav95:

--- Quote from: M2A on June 16, 2023, 07:50:52 am ---Real nice looking unstrung limb profile especially with it being as narrow as it is. Great looking piece of work.
Mike   

--- End quote ---

Thanks mike!  It was a wonky narrow piece of wood but it survived. 

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version