Main Discussion Area > Bows
Hi tech redneck flight bow.
Selfbowman:
Steve it means I did not test the sample Allen did and I don’t know if he heated the sample.
Selfbowman:
260 gr. 200 fps 48@25” 3/4” set
willie:
Arvin I think steve is asking about what your are calling force draw.
some folks like to plot what the poundage is at each inch of the draw after the bow is finished
https://cari-bow.com/wp-content/uploads/2014/02/extra-energy-stored-from-recurve-design.jpg
and the chart is typically called a force draw curve.
Did Alan send something like that before hand which is hopefully what you will end up as?
Selfbowman:
Yes Willie I tillered the bow to the force draw that he projected while meeting the bend profile at the projected draw weight. It was close till the bow took set.
superdav95:
It may not have met your expectations Arvin but still a very cool build.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version