Main Discussion Area > Bows

Hi tech redneck flight bow.

<< < (13/24) > >>

willie:

--- Quote from: Selfbowman on October 21, 2024, 02:10:41 pm --- The thickness numbers are not working out. But I think it’s the heat changing the wood . I’m going to try checking all the other numbers.

--- End quote ---
was the bend sample heatreated the same as the bow limbs?

medicinewheel:
That handle build-up is fantastic!

Selfbowman:
Got it to 24” and the recurve ends pulled out about a 1/2”. For my first try at tillering force draw weight to bend profile I’m pretty happy. I will try heating the ends but not real hopeful on that. I will say that you can tiller bend profile to force daw though. I will test the bow tomorrow.

Selfbowman:
Willie I don’t my know but I think not.

Badger:

--- Quote from: Selfbowman on October 22, 2024, 11:55:23 am ---Willie I don’t my know but I think not.

--- End quote ---

 What does it mean? to tiller to force draw? Does it mean you simply hit a certain weight at different points as you approach full draw? I would think this might be a good way to come in light if something goes just a little wrong, like set for instance.

Navigation

[0] Message Index

[#] Next page

[*] Previous page