Main Discussion Area > Bows
64” recurve computer design
Selfbowman:
Steve I’m going to tiller this to the computer force draw weight design and bend profile. I’ve found out if you use the computer dimensions you will be real close. Also I work my bend profile and not go over my designed draw weight. So I tiller from fades to tips following my bend profile.
Selfbowman:
Got the bow pretty straight and tip overlays on. Now the string groves. The dimensions are close to the plan.
Selfbowman:
Pic
Selfbowman:
Well I have it to 20” on force draw and it’s hitting between 1/2 pound and pound at every inch so far . Now it gets tricky.🤠🤠
sleek:
--- Quote from: Selfbowman on May 21, 2025, 01:57:26 pm ---Well I have it to 20” on force draw and it’s hitting between 1/2 pound and pound at every inch so far . Now it gets tricky.🤠🤠
--- End quote ---
This is always my favorite part. It gets exciting when things start coming together on the fd numbers.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version