Author Topic: Black cherry wood uses?  (Read 87 times)

0 Members and 1 Guest are viewing this topic.

Offline sleek

  • Administrator
  • Member
  • Posts: 7,118
Black cherry wood uses?
« on: Today at 01:01:46 am »
I cut a 6 inch diameter straight black cherry tree today and cut it into roughly 2 6 ft sections and a couple smaller bits. Anyone know what it would do good for?
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,905
Re: Black cherry wood uses?
« Reply #1 on: Today at 02:01:31 am »
Early on in my bow building I built a few sapwood black cherry bows. Marginal as bow wood I think but an overbuilt style bow would probably make a good survival bow. I've heard that the heartwood is brittle but does pretty well with sinew backing.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline sleek

  • Administrator
  • Member
  • Posts: 7,118
Re: Black cherry wood uses?
« Reply #2 on: Today at 02:10:17 am »
Im absolutely terrified of black cherry as a bow wood. I had one break, it hit me in the nipple. You dont know pain until a sharp stick strikes you right in the nipple at Mach Jesus, and leaves you standing there with a pain so sharp you regret every life decision that lead you to this moment.

Maybe if I bamboo backed it. Lol, but still no. Maybe... nah. Everythime I think of it my hair in my neck stands up, and that was 10 years ago.
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline chamookman

  • Member
  • Posts: 3,083
Re: Black cherry wood uses?
« Reply #3 on: Today at 05:10:26 am »
t was under the help of Gary Davis, with Whom I became very close with. Great times !  (=) Bob.
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.

Offline Eric Krewson

  • Member
  • Posts: 5,622
Re: Black cherry wood uses?
« Reply #4 on: Today at 10:37:35 am »
There was local guy named Jimmy Taylor who started out selling hickory bows at a local flea market for $20. He was a native American and sold his bows at NA gatherings and craft fairs. He started selling bows on line and used mostly hickory backed cherry for his bows. He was the nicest guy you could ever meet who would give you the shirt off his back but the worst compulsive liar I ever met as well.

He had a shop set up to make bows that had a line of milling machines to complete the bows step by step, start to finish; 15 minutes. He would string the bows, tiller them on a balloon sander and pull them to 31", if they didn't break on the first pull he shipped them. He had a huge 5' tall pile of broken bows next to his shop.

He had his own sawmill and cut all of his bow wood himself.

If you ordered a 50# bow you might get an 80# bow or a 30# one, he shipped what ever he had. He had a few guys that worked with him but they all quit when he started taking the money from people and companies that may order up to 100 bows at a time but he kept the cash and never sent them the bows.

He made bows for Dan Quillen for a while but got Dan in a bind with his customers for Jimmy's shoddy work ethics as well and split from having contact with him.

Long story; I shot some of Jimmy's hickory backed cherry bows, I told people to order a high poundage bow, retiller them to what they wanted and they would have a pretty good bow that would last. Jimmy's one shot balloon tillering in less than a minute was was pitiful. I saw a lot more people shooting the hickory backed cherry bows and found they were light in the hand and held up really well if someone was lucky enough to get one of the good ones.

I drove to Jimmy's shop one time to visit and watch him crank out bows, it was a sight to see.

Jimmy made and sold at least 10,000 of the hickory backed cherry and hickory backed with a strip of hickory bows, he sold them all over the world.

Jimmy died of cancer about 15 years ago, he was one of a kind for sure.



 

Offline WhistlingBadger

  • Member
  • Posts: 1,934
  • Future Expert
Re: Black cherry wood uses?
« Reply #5 on: Today at 11:23:42 am »
If black cherry is anything like the chokecherry around here, it's beautiful stuff.  Our local chokecherry is useless for bows (might make good corkscrews, though).  The grain patterns in it make me really with I knew how to do actual woodworking.  I would love some bowls, furniture, and/or musical instruments made of that stuff.  Makes nice knife handles, too.
Thomas
Lander, Wyoming
Arise!  Kill, and eat!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,905
Re: Black cherry wood uses?
« Reply #6 on: Today at 12:21:48 pm »
Eric, I met Jimmy Taylor years ago at the South eastern championships out side of Elberton, Ga. I bought a bunch of hickory backing strips from him. They all had grain violations on them but as far as I know none of those backing strips failed. He always wore buck skins when I saw him. He sold tons of those little bows of his.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC