Author Topic: Reflexed Ocean Spray  (Read 186 times)

0 Members and 3 Guests are viewing this topic.

Offline Doug509

  • Member
  • Posts: 38
Reflexed Ocean Spray
« on: November 27, 2025, 01:22:41 pm »
Looking for ideas on what to do with a highly reflexed 74" ocean spray stave.  Upper limb on right is reflexed 6"  lower limb 9".  I was considering reflexing the handle with steam to deflex limbs and make a reflex deflex bow.  Or should i leave as is and get tillering with no changes.

Offline Badger

  • Member
  • Posts: 8,199
Re: Reflexed Ocean Spray
« Reply #1 on: November 27, 2025, 04:11:20 pm »
     I would deflex the handle. It would be very unstable with all that reflex

Offline medicinewheel

  • Member
  • Posts: 3,651
Re: Reflexed Ocean Spray
« Reply #2 on: Today at 02:33:41 am »
...  I was considering reflexing the handle with steam to deflex limbs and make a reflex deflex bow.  ...

Guess you ment to say deflexing here??
Frank from Germany...

Offline Del the cat

  • Member
  • Posts: 8,411
    • Derek Hutchison Native Wood Self Bows
Re: Reflexed Ocean Spray
« Reply #3 on: Today at 08:03:26 am »
     I would deflex the handle. It would be very unstable with all that reflex
What he says  ;D
Plus, with that much reflex, it will be hell's own job to brace it, and then it may end up under weight because it's been worked down so much just to brace it.
Del
Health warning, these posts may contain traces of nut.

Offline Eric Krewson

  • Member
  • Posts: 5,642
Re: Reflexed Ocean Spray
« Reply #4 on: Today at 10:12:43 am »
On an overly reflexed stave, I get out my heat gun and take most of the reflex out, I may leave 2-3 inches.

Offline Doug509

  • Member
  • Posts: 38
Re: Reflexed Ocean Spray
« Reply #5 on: Today at 11:41:29 am »
Thanks for your suggestions.  I did use a heat gun on left/lower limb, 20" from the handle.  Now both limbs are equally reflexed now and the handle is 5" below the tips.  When I study the stave, I'm thinking a 5 curve bow could be possible?  The limbs are 25 to 30 mm wide, maybe too narrow for a 5 curve?