I unwrapped it , the sinew isn't cured yet , but it's holding just over 1" reflex ( measured to the back) .I dyed the last layer of sinew so I could easily determine what I sanding through as I evened up the back .
![](http://images.yuku.com/image/jpeg/a02361e51b0305563b6d18c939136c9c4e4fbea2.JPG)
![](http://images.yuku.com/image/jpeg/39a266c10206239218031c6c5db19f6eacad59af.JPG)
Next I will check ,again the thickness of the horn every where .Then sinew wrap the limbs just below the nocks . Then make and glue the horn spacer ,and install it in the handle ,,,,,, Then sinew wrap the handle.
![](http://images.yuku.com/image/jpeg/61426fe16b04630915835768269ec3d2b7dec9ce.JPG)
And then cut and shape the nocks.
Ralph