Author Topic: Unusual timber sources  (Read 182 times)

0 Members and 1 Guest are viewing this topic.

Offline stuckinthemud

  • Member
  • Posts: 2,435
    • avenue woodcarving
Unusual timber sources
« on: January 24, 2026, 05:49:48 pm »
Here 's a lateral thinking thread for a winter evening.

I have seen a bow built from a stairs hand-rail (it was ash) and others from fence posts (Osage), I was once told you could use a pick axe handle or two spliced together (hickory or ash) and I guess even an oar might do the trick (ash).  Any ideas for unorthodox timber sources - it's Trade season soon and some of us struggle with getting bow staves... :BB :) :D ;D

Offline Pat B

  • Administrator
  • Member
  • Posts: 38,041
Re: Unusual timber sources
« Reply #1 on: January 24, 2026, 06:49:49 pm »
Raw and recycled flooring, both hardwood and bamboo. Some pallets are made from hickory and other usable hardwoods.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline mmattockx

  • Member
  • Posts: 1,031
Re: Unusual timber sources
« Reply #2 on: January 24, 2026, 08:46:16 pm »
I picked up a fair pile of discarded ash flooring a while ago for free. The guy was renovating and had no use for the old flooring. I expect it will mill into very usable laminations when I get around to it. I've used some of the smaller pieces for tool handles and the like and it is very dense and hard.


Mark

Offline JW_Halverson

  • Global Moderator
  • Member
  • Posts: 12,206
Re: Unusual timber sources
« Reply #3 on: January 25, 2026, 12:07:16 pm »
Here 's a lateral thinking thread for a winter evening.

I have seen a bow built from a stairs hand-rail (it was ash) and others from fence posts (Osage), I was once told you could use a pick axe handle or two spliced together (hickory or ash) and I guess even an oar might do the trick (ash).  Any ideas for unorthodox timber sources - it's Trade season soon and some of us struggle with getting bow staves... :BB :) :D ;D

Several times I have spent a few minutes picking through axe handles at the local hardware store after reading in (I believe) Traditional Bowyers Bible vol 1 about making a spliced ax handle bow. I've struggled to find a single one with the right grain, much less two on the same day. It's DEFINITELY still on my to-do list! I've even got a name for the bow: "Who Could Axe For More?"


Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Tuomo

  • Member
  • Posts: 215
    • Puujousi
Re: Unusual timber sources
« Reply #4 on: Today at 05:36:02 am »
I once made (in 2013) a broomstick bow. I don’t know the wood species, but it was about 1700 mm long, 28 mm diameter, with good, straight grain and dense wood, so I decided to give it a try. The end result was 41 pounds at a 27-inch draw, and it is a hunting-legal weapon here in Finland. I even left the original sticker on it.

The first image shows it in its intended use as a broomstick, and then the finished bow (the sticker and full draw).

Offline Pat B

  • Administrator
  • Member
  • Posts: 38,041
Re: Unusual timber sources
« Reply #5 on: Today at 12:59:21 pm »
Well done.Beautiful tiller.  :OK
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC