Author Topic: some BIG sawblades...arrowheads and knife blades  (Read 7337 times)

0 Members and 1 Guest are viewing this topic.

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: some BIG sawblades...arrowheads and knife blades
« Reply #15 on: December 28, 2010, 09:17:35 pm »
nice design on those Rich ,deer killers for sure !!

Offline half eye

  • Member
  • Posts: 3,300
Re: some BIG sawblades...arrowheads and knife blades
« Reply #16 on: December 28, 2010, 09:32:39 pm »
Thought you might like 'em .....since I stold the idea off of you !!!!
rich

Offline wvarcher

  • Member
  • Posts: 214
Re: some BIG sawblades...arrowheads and knife blades
« Reply #17 on: December 29, 2010, 09:46:17 pm »
Half eye, how do they fly?  Any problems with wind planing?  Thanks for another interesting and inspiring topic!

Offline half eye

  • Member
  • Posts: 3,300
Re: some BIG sawblades...arrowheads and knife blades
« Reply #18 on: December 29, 2010, 10:27:52 pm »
WV
I have not had any problems with flight with them. I ground some in the double beveled and some in the single bevel and that didn't make no difference either.

I shoot heavy hardwood arrows [oak,ash,walnut,hickory etc.] about 600-700 grains 3/8" diameter, 3 fletch in either 5" or 6", and both 1 degree offset and helical and they both shoot good. The other thing about my arrows is I cut them so that full draw brings the back of the head right back to my finger, then release.

I really dont believe that you'll have a planing problem.
rich

Offline wvarcher

  • Member
  • Posts: 214
Re: some BIG sawblades...arrowheads and knife blades
« Reply #19 on: December 30, 2010, 12:47:04 am »
thanks, half E.  You've inspired me to make a few of my own.  What other steel could you recommend besides saw blades?