Author Topic: Almost got a knife blade...  (Read 634 times)

0 Members and 1 Guest are viewing this topic.

Offline gstoneberg

  • Member
  • Posts: 3,889
Almost got a knife blade...
« on: November 28, 2011, 11:52:21 pm »
I had a little knife blade all done, and I snapped off the corner doing the notches.  If I could notch I'd be at least a little dangerous.  Good grief.  There's enough natural curve in this blade that I'm not sure I can get a point out of it now.  Might go ahead and notch it again in a quarter inch and let the antler go out onto the blade a little.  I really want a little skinner like this.


St Paul, TX

Offline seider

  • Member
  • Posts: 263
Re: Almost got a knife blade...
« Reply #1 on: November 29, 2011, 12:16:43 am »
that is a nice blade real nice edge to bad it broke i would try and knotch it again and see what happens.  But then again if i tryed i would have broke it way before i got to that point. 
Now is the time for all good men to come to the aid of there country.