Author Topic: Osage bendy handle for Paul  (Read 8285 times)

0 Members and 1 Guest are viewing this topic.

Offline Blackcoyote

  • Member
  • Posts: 461
Osage bendy handle for Paul
« on: November 19, 2014, 02:27:06 pm »
At Marshall this past spring Mr. Chicago kid aka paulsemp gifted me a Osage stave then asked me if I'd do a swap with him (which sent me to panic mode since I've never done one and only made 4 bows so far)

I decided to make my first short bendy handle bow with the stave, at Elm hall Paul offered some guidance as I was working on the bow and I got the idea that it would be a cool bow for him since he gave me the osage, some help, and it fit his specs.

So I finished it up and sent it off....I know Paul is super busy so I thought I'd post it.

53" 45@26, cow horn tips, two tone rit dye job with alcohol drip, cork handle build up, leather grip, some muskrat belly fur silencers, and a ultra cam 8 strand string.  :o

Named it "no excuses" cause if you've ever shot with Paul you'll hear that!

Hope ya like it Paul! I had a tough time sending down to the land of pavement, traffic and deep dish pizza!  Now I must build me one, that I can draw to 29"  >:D

Some pics of number 5....








Hopefully he can add some better pics...I just snapped a few quick ones.
Drew - St. Johns, Michigan

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,488
Re: Osage bendy handle for Paul
« Reply #1 on: November 19, 2014, 02:29:05 pm »
No excuses there!  cool bow.  8)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Osage bendy handle for Paul
« Reply #2 on: November 19, 2014, 02:49:23 pm »
Good job Drewsy! Looks sweet with the dye job and that tiller is nutz.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Arrowind

  • Member
  • Posts: 1,428
Re: Osage bendy handle for Paul
« Reply #3 on: November 19, 2014, 03:17:34 pm »
GREAT JOB!  Nice bow!
Talking trees. What do trees have to talk about, hmm... except the consistency of squirrel droppings?

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Osage bendy handle for Paul
« Reply #4 on: November 19, 2014, 03:37:17 pm »
nice

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Osage bendy handle for Paul
« Reply #5 on: November 19, 2014, 04:00:29 pm »
Tiller looks spot on.  Real nice bendy. 

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,869
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Osage bendy handle for Paul
« Reply #6 on: November 19, 2014, 05:15:11 pm »
That is a very nice bow.  You did good
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline DC

  • Member
  • Posts: 10,396
Re: Osage bendy handle for Paul
« Reply #7 on: November 19, 2014, 05:32:28 pm »
I really like the dye job. Is the alcohol drip just as it sounds, dye it and then drip alcohol on it to blend/smear it?

blackhawk

  • Guest
Re: Osage bendy handle for Paul
« Reply #8 on: November 19, 2014, 06:02:43 pm »
I don't know..ya prob should shave about 15 pounds off of it so he can pull it back  :P  ::)  :laugh:

Seriously tho nice job drew  ;)

Offline bowmo

  • Member
  • Posts: 1,035
Re: Osage bendy handle for Paul
« Reply #9 on: November 19, 2014, 06:20:08 pm »
That's a beauty. I almost never make bend in the handle bows, but I sure do love the way they look at full draw.

Offline paulsemp

  • Member
  • Posts: 1,918
Re: Osage bendy handle for Paul
« Reply #10 on: November 19, 2014, 06:21:31 pm »
I got a pic from my wife while I was at work of a tube from drew. I truly wasn't expecting this.  I love every thing about this one. Unfortunately I just haven't had a lot of time to shoot it a lot and take pics for all you guys. Thank you for posting drew and I promise I'll get some posted soon. Thanks again drew!

Offline Hamish

  • Member
  • Posts: 1,471
Re: Osage bendy handle for Paul
« Reply #11 on: November 19, 2014, 06:55:16 pm »
Lovely work. Short bow with no set. Very well done.
                                                                             Hamish.

Offline Scottski

  • Member
  • Posts: 462
Re: Osage bendy handle for Paul
« Reply #12 on: November 19, 2014, 07:33:44 pm »
Nice looking bow you built there.
Did the Native Americans think about all this that much or just do it?

Offline bubby

  • Member
  • Posts: 11,054
Re: Osage bendy handle for Paul
« Reply #13 on: November 19, 2014, 07:38:55 pm »
you did good man, nice job pauls a good guy aint he ;)
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Will H

  • Member
  • Posts: 2,120
Re: Osage bendy handle for Paul
« Reply #14 on: November 19, 2014, 07:39:11 pm »
Super nice bow right there!
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"