Author Topic: 2015 Primitive Archer bow trade works in progress  (Read 352508 times)

0 Members and 1 Guest are viewing this topic.

Offline alwayslookin

  • Member
  • Posts: 350
Re: 2015 Primitive Archer bow trade works in progress
« Reply #390 on: April 15, 2015, 12:41:50 pm »
Thanks, I got some challenges to overcome with it. Might even need some advice for a bit of it. But if it works out it will turn out sweet!Patrick
that's why we do it though right? If it was easy we would get bored. I think that kink in the handle would be the trickiest part. I am almost done with a Osage bow that I took 2 months just looking at to try and figure how to lay it out with the checks in it.
In all your ways acknowledge  him and he will make your paths straight.

Offline sleek

  • Member
  • Posts: 6,688
Re: 2015 Primitive Archer bow trade works in progress
« Reply #391 on: April 15, 2015, 01:22:12 pm »
Do I have the other half of that stave pat? The roughed out bow you gave me?

I finally got out of my funk so here is a little update on my plan B that has turned into plan A. I've got it roughed out and an even thickness in the limbs. I've got to do a little bit more on one fade. Then get it Bending good for floor tiller. Then a few sessions of heat bending and a good heat treat. Patrick


Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline lebhuntfish

  • Member
  • Posts: 3,800
  • If the wood will bend, I'll make it beautiful!
Re: 2015 Primitive Archer bow trade works in progress
« Reply #392 on: April 15, 2015, 01:55:56 pm »
No Kevin, the one you have is from a fence post. Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: 2015 Primitive Archer bow trade works in progress
« Reply #393 on: April 15, 2015, 02:51:17 pm »
Have my profile all roughed out, going to chase another ring methinks. Remember to keep checking in guys!
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline sleek

  • Member
  • Posts: 6,688
Re: 2015 Primitive Archer bow trade works in progress
« Reply #394 on: April 15, 2015, 08:43:02 pm »
Wow. Very similar.
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline jeffp51

  • Member
  • Posts: 1,640
Re: 2015 Primitive Archer bow trade works in progress
« Reply #395 on: April 15, 2015, 11:46:32 pm »
watching wood dry at the moment.

Offline Accipiter

  • Member
  • Posts: 246
Re: 2015 Primitive Archer bow trade works in progress
« Reply #396 on: April 16, 2015, 12:11:46 am »
I'm with Jeff at the moment. Option #1 is a bit past floor tiller and has recurves, but I don't want to bend it too much until it loses a bit more moisture.

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: 2015 Primitive Archer bow trade works in progress
« Reply #397 on: April 16, 2015, 12:33:11 am »
My bow is braced and slowly being worked down

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: 2015 Primitive Archer bow trade works in progress
« Reply #398 on: April 20, 2015, 09:57:26 pm »
Seems to be getting quiet here. If you haven't posted let us know where you're at.
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: 2015 Primitive Archer bow trade works in progress
« Reply #399 on: April 20, 2015, 10:14:56 pm »
I'm making myself a bow before I continue for the trade. Got a bone to pick with s yeller stick.
Nothing ventured nothing gained

Offline Mo_coon-catcher

  • Member
  • Posts: 1,319
Re: 2015 Primitive Archer bow trade works in progress
« Reply #400 on: April 20, 2015, 11:25:29 pm »
I'm not any further but I got the recurve about finished. So I'm closer to getting more done on the trade bow. It just needs the finish put on and a few final details then I'll be back to the trade bow. In 90 percent humidity it takes forever for tru oil to dry. I'm wishing I would have used the  beeswax deer tallow mix.
Kyle

Offline J05H

  • Member
  • Posts: 478
Re: 2015 Primitive Archer bow trade works in progress
« Reply #401 on: April 21, 2015, 12:09:22 am »
I've been finishing up some other projects, but they're done now and I'm sifting through my stave stash.
If you never have time to do it right, you'll always have time to do it over.

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: 2015 Primitive Archer bow trade works in progress
« Reply #402 on: April 21, 2015, 09:42:13 am »
Well I've been getting frustrated with my scraper. So I went and found my original one and put a new burr on it, that sucker is great now. Took some digging. I really gotta clean. The takedown is floor Tillered. Need to make a tillering string. The Osage I'm making myself is taking forever to cut the profile. Trying to get it near floor tiller then gonna do some reflexing. It's got a natural r/d profile. Just gonna accentuate the tips and try and take some of this mid limb twist. If it twists and comes back at the tips, do I need to remove it still?
Nothing ventured nothing gained

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
Re: 2015 Primitive Archer bow trade works in progress
« Reply #403 on: April 21, 2015, 10:19:11 am »
Im diligently watching the package tracker.

Offline lebhuntfish

  • Member
  • Posts: 3,800
  • If the wood will bend, I'll make it beautiful!
Re: 2015 Primitive Archer bow trade works in progress
« Reply #404 on: April 21, 2015, 01:01:12 pm »
Where is it going bubbles?  >:D Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!