Author Topic: Red Oak Sapling for a Warbow  (Read 2989 times)

0 Members and 1 Guest are viewing this topic.

Offline WoodSorrel

  • Member
  • Posts: 5
Red Oak Sapling for a Warbow
« on: January 30, 2016, 01:01:50 pm »
Well I got a nice straight Red Oak sapling today that tapers from about 3-4" at the bottom to about 1 1/2-2" at about 6' with a few small knots spread throughout the sapling. Would it be to much to make this into a warbow in the 75-80 lbs range at 31" and 74" long. If it is possible what would the best way doing it be design wise? Thanks for any help and will have picks up as soon as the paint on the ends dry.

Offline WoodSorrel

  • Member
  • Posts: 5
Re: Red Oak Sapling for a Warbow
« Reply #1 on: January 30, 2016, 02:34:41 pm »
scratch that can't seem to upload the pic
« Last Edit: January 30, 2016, 03:12:04 pm by WoodSorrel »