Author Topic: gravel clovis  (Read 1475 times)

0 Members and 1 Guest are viewing this topic.

Offline 1442

  • Member
  • Posts: 945
gravel clovis
« on: December 30, 2016, 12:50:11 am »
This thing gave me fits fluting it
The second side flute went abou 3/8" and I wound up flaking that whole side off to try again.
Started out as a piece of gravel that I skint and cooked the biface.

Offline nclonghunter

  • Member
  • Posts: 1779
Re: gravel clovis
« Reply #1 on: December 30, 2016, 06:24:21 am »
Looks good!  I have lost inches after several times trying to reset and flute. Some rock just refuses to go long.
There are no bad knappers, only bad flakes

Offline 1442

  • Member
  • Posts: 945
Re: gravel clovis
« Reply #2 on: December 30, 2016, 09:49:21 am »
Thanks, I gotta put the blame on the fluter. The rock was just killer and flaked really good.
I have a few process pics I'll post later when I have more time

Offline 1442

  • Member
  • Posts: 945
Re: gravel clovis
« Reply #3 on: December 30, 2016, 10:37:27 pm »
here's some process pics

Offline 1442

  • Member
  • Posts: 945
Re: gravel clovis
« Reply #4 on: December 30, 2016, 10:40:35 pm »
second side flute

Offline 1442

  • Member
  • Posts: 945
Re: gravel clovis
« Reply #5 on: December 30, 2016, 10:45:27 pm »
that flute failed so I reflaked the whole side, reset the nipple and drew the outline where I predicted the flute to go.
It followed the lines pretty good which wasn't much but this thing is super thin at this point and I feel lucky to get this much flute on it.

Offline 1442

  • Member
  • Posts: 945
Re: gravel clovis
« Reply #6 on: December 30, 2016, 10:47:34 pm »
here's the other side after all the flute repairs and the finished point again

Offline ---GUTSHOT--->

  • Member
  • Posts: 1310
Re: gravel clovis
« Reply #7 on: January 04, 2017, 09:18:48 am »
Very nice

Offline vinemaplebows

  • Member
  • Posts: 1386
Re: gravel clovis
« Reply #8 on: January 04, 2017, 10:34:06 am »
Nice gravel!
Debating is an intellectual exchange of differing views...with no winners.

Offline selfbow joe

  • Member
  • Posts: 992
  • 1-812-701-1789
Re: gravel clovis
« Reply #9 on: January 04, 2017, 04:41:12 pm »
Very nice!

Offline 1442

  • Member
  • Posts: 945
Re: gravel clovis
« Reply #10 on: January 04, 2017, 05:02:53 pm »
thanks

Offline IdahoMatt

  • Member
  • Posts: 2050
Re: gravel clovis
« Reply #11 on: January 15, 2017, 07:18:14 pm »
 :)

Offline Chippintuff

  • Member
  • Posts: 777
Re: gravel clovis
« Reply #12 on: January 16, 2017, 03:28:24 pm »
Nice work.

WA

Offline 1442

  • Member
  • Posts: 945
Re: gravel clovis
« Reply #13 on: January 17, 2017, 12:13:46 am »
thanks
That's one of my favorite pieces of gravel I ever worked.