Author Topic: Christian Springs Rifle  (Read 39790 times)

0 Members and 1 Guest are viewing this topic.

Offline PaulN/KS

  • Member
  • Posts: 1,381
Re: Christian Springs Rifle
« Reply #30 on: August 24, 2018, 06:10:35 am »
Nice use of the stavemaster there in the one picture.  :OK
Looks good, that's a nice piece of wood for the stock.

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #31 on: September 25, 2018, 09:33:35 am »


Back at it again. Shaping up the wrist some.


Offline PaulN/KS

  • Member
  • Posts: 1,381
Re: Christian Springs Rifle
« Reply #32 on: September 25, 2018, 10:51:34 am »
Looking good.
Glad to see you back at the workbench again.

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: Christian Springs Rifle
« Reply #33 on: September 25, 2018, 11:18:40 am »
Real nice build along, Mike.  You make it look almost easy!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #34 on: September 25, 2018, 11:38:34 am »
Looking good.
Glad to see you back at the workbench again.

Thanks Paul, its not been easy and will never be the same. I have lost the best thing I ever had! But I'm trying to get back to somewhat of a normal life.

Offline Parnell

  • Member
  • Posts: 5,551
Re: Christian Springs Rifle
« Reply #35 on: September 26, 2018, 09:42:11 am »
Glad to see the post, Mike.
1’—>1’

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #36 on: September 26, 2018, 09:43:48 am »


Trigger guard is in and you can swing my truck from it before it would move! Went in real nice and tight.




Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #37 on: September 26, 2018, 03:49:38 pm »


Butt plate is about ready to screw down.

« Last Edit: September 26, 2018, 03:52:53 pm by Mike Yancey »

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #38 on: September 27, 2018, 10:28:02 am »
Butt Plate is on and starting to shape the Butt.





Heres one of the profile of the lock side

« Last Edit: September 27, 2018, 10:37:59 am by Mike Yancey »

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: Christian Springs Rifle
« Reply #39 on: September 27, 2018, 11:04:26 am »
That is turning into a real fine rifle, Mike!  Keep on truckin'!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #40 on: September 28, 2018, 04:19:05 pm »


Got the nose cap on and the stock almost finished around it.

Offline PaulN/KS

  • Member
  • Posts: 1,381
Re: Christian Springs Rifle
« Reply #41 on: September 29, 2018, 05:30:26 am »
Shaping up real well Mike.  :OK
I like how the well the stave vise is working as a stock vise...  :D

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #42 on: September 29, 2018, 10:01:51 am »


All the ramrod stuff is done now its off to the sights!

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #43 on: September 29, 2018, 01:10:15 pm »


Got the front sight in today dovetailed in all nice and tight.



Rear sight is in. This thing had the thinnest base plate to dovetail in I have ever seen so I soldered it in as well.
« Last Edit: September 29, 2018, 03:13:11 pm by Mike Yancey »

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #44 on: September 29, 2018, 07:11:28 pm »


Doing a little scraping on the stock getting it ready to carve! Look at that curl!