Author Topic: Has anyone ever made a barrel from scratch?  (Read 3161 times)

0 Members and 1 Guest are viewing this topic.

Offline Sammakesbows

  • Member
  • Posts: 45
Has anyone ever made a barrel from scratch?
« on: August 28, 2020, 09:35:06 pm »
Has anyone on here forged it from stock, and how would you go about it?

Offline Eric Krewson

  • Member
  • Posts: 5,306
Re: Has anyone ever made a barrel from scratch?
« Reply #1 on: August 29, 2020, 06:49:10 am »
This is an involved process, people who have forged their own barrel are few and far between.

Here is a video on the process, I didn't watch it but have seen several in the past and the start looks correct.

https://video.search.yahoo.com/search/video?fr=mcafee&p=forging+a+flintlock+barrel#id=1&vid=c1c27bc249509b5336ec593cb147c18e&action=click

The Colonial Williamsburg video shows the whole gun building process including forging a barrel.

https://www.youtube.com/watch?v=qTy3uQFsirk

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,884
  • Eddie Parker
Re: Has anyone ever made a barrel from scratch?
« Reply #2 on: August 29, 2020, 08:03:07 am »
One of the Fireside books has a good step by step description of this with pictures.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline HH~

  • Member
  • Posts: 1,742
Re: Has anyone ever made a barrel from scratch?
« Reply #3 on: October 07, 2020, 06:17:08 pm »
I have watched guys in Mass bore then rifle by hand. Very interesting. The boring looked to be the important part, getting it as straight as possible. Think they got blanks from Penn.

Shawn

MAFA: Makin America Free Again

Long is the road, Hard is the way.

Mother Gue never raised such a foolish child. . . .

Readily will I display the intestinal fortitude required to fight onto the Ranger objective and complete the mission though I be the lone survivor. RLTW