« previous next »
Pages: [1] 2

Author Topic: Yew Bow  (Read 16691 times)

0 Members and 1 Guest are viewing this topic.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,869
  • Keep it flexible
    • Marc's Bows and Arrows
Yew Bow
« on: July 08, 2008, 09:47:31 pm »
I just made this bow for a fellow in Sweden.  I won't call it a war bow as it doesn't quite have the draw weight but it's still more bow than I can handle.  The bow is Yew 75" long by just under 1 1/2" wide and about 1 1/4" thick at the center.  Draw weight is around 110# @ 30".  The wood was very nice and clean with a couple small pin knots and decent ring count.  It took a bit of set in the making.  I put horn nocks overlays for duarability as he didn't want horn nocks on the bow.

Here's a few pictures starting with the bow braced and a side and belly view



This is me pulling the bow back as far as I can, about 26" and 85#



And this is the bow at full draw, double handed



« Last Edit: January 01, 2009, 03:21:30 pm by Marc St Louis »
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Yew Bow
« Reply #1 on: July 08, 2008, 10:05:08 pm »
That is an impressive bow.  The tiller is perfect.  And I will call it a war bow at 110#.   :o Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

radius

  • Guest
Re: Yew Bow
« Reply #2 on: July 09, 2008, 02:18:16 am »
Marc, that looks DANGEROUS!  Pulling it two handed on a peg like that.

Hey, I've learned alot just Looking at your bows, but I wanna ask a question, if i may:  Have you made any yew laminate bows which are unbacked?  I mean, all heartwood??  Also, how have you found yew to hold up in recurves?  I read somewhere that it's not so great for that, but I value your opinion and I'd like to hear your answer.  Thanks, and keep up the great work!

Scott
Logged

Offline Cromm

  • Member
  • Posts: 1,064
Re: Yew Bow
« Reply #3 on: July 09, 2008, 05:04:09 am »
Hi, Very nice!!!!!
Logged
Great Britain.
Home of the Longbowman.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,869
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Yew Bow
« Reply #4 on: July 09, 2008, 10:13:57 am »
Thanks guys. 

Not a peg Scott.  That is a piece of 2 X 4 that is bolted to the wall.  It's not going anywhere.  I'll send you a PM on your question
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,520
Re: Yew Bow
« Reply #5 on: July 09, 2008, 10:30:23 am »
A real beauty Marc. I, like Justin would call it a war bow but whatever it is called it is exceptional. Very nice work...again! 8)     Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Ryano

  • Member
  • Posts: 3,578
  • Ryan O'Sullivan, North Western Pennsylvania
Re: Yew Bow
« Reply #6 on: July 09, 2008, 12:50:21 pm »
That does make me cringe every time I see you pull a bow on that thing. You'd be in a world of hurt if that bow decided to blow at full draw..... :o Nice looking bow Marc. :)
Logged
Its November, I'm gone hunt'in.......
Osage is still better.....

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Yew Bow
« Reply #7 on: July 09, 2008, 02:48:24 pm »
Only 110# ? It should still make a good starter bow for a young English kid.  ::) ;D  ;D
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Bowbound

  • Guest
Re: Yew Bow
« Reply #8 on: July 09, 2008, 03:00:33 pm »
i'm pretty sure it would be up to the standard of war. It looks great, thats some lucky guy in sweden.
Logged

Bueskytter

  • Guest
Re: Yew Bow
« Reply #9 on: July 09, 2008, 04:47:40 pm »
Wow, that really looks excellent.
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,869
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Yew Bow
« Reply #10 on: July 09, 2008, 04:55:28 pm »
Thanks Guys.

This is nothing. I have used pretty well the same system to tiller bows up to 175# and it held up so I'm not worried with a measely 110# bow  :)
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Bueskytter

  • Guest
Re: Yew Bow
« Reply #11 on: July 09, 2008, 05:09:32 pm »
Marc, could I ask what kind of price a bow such as this would cost?
Logged

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Yew Bow
« Reply #12 on: July 09, 2008, 05:17:40 pm »
Looks great Marc! That's certainly more bow than I'd want to handle, or even could probably without lots of excercise ;D.
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,869
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Yew Bow
« Reply #13 on: July 09, 2008, 08:41:09 pm »
It's more than I want to handle also Paul and never mind the exercise.

Bueskytter. I sent you a PM
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

thunder

  • Guest
Re: Yew Bow
« Reply #14 on: July 10, 2008, 08:36:14 am »
Nice Yew bow Marc. Lucky fellow who have this great bow.
Logged
Pages: [1] 2
« previous next »