Author Topic: Take down ,tiller check. (Read 1331 times)

Pappy · « **on:** July 30, 2009, 03:01:55 am »

See what yall think,I have to 54@26 and could give a little weight if I needed to but it shoot great so I may leave it.This is out of 2 limbs I had laying around that have broke over the last year or so so I put a sleeve on them and now brought some new life to the good limbs.

Pappy

GregB · « **Reply #1 on:** July 30, 2009, 05:10:59 am »

Seal it and hunt with it...the tiller looks great to me!

Timo · « **Reply #2 on:** July 30, 2009, 05:26:07 am »

Bottom limb looks a bit strong,but not much. We all see it different you know?

I like mine like that. Sweet looker Pappy!

George Tsoukalas · « **Reply #3 on:** July 30, 2009, 05:40:17 am »

It does look a bit string but it's all according to how it feels when drawn. Excellent work, Pappy. Jawge

Herm from Bavaria · « **Reply #4 on:** July 30, 2009, 05:46:42 am »

good tiller! nice bow.

Pappy · « **Reply #5 on:** July 30, 2009, 05:55:12 am »

Thanks guys,It is about a 1/4 stiff on the bottom but shoots really nice and feels smooth.I may just shoot it a bunch this weekend and see how it looks then .Only had about 25 shots out of it so far.
Been pulled to full draw on the board a buch but that ant the same as shooting it.

Pappy

n2everythg · « **Reply #6 on:** July 30, 2009, 06:03:01 am »

dang pappy I have nothing bad to say about that at all. Nice lookin bow.
shoot it in then check again would be my suggestion. maybe make some final tweeks after.
Looks great...
my address is.....

later
n2

Josh · « **Reply #7 on:** July 30, 2009, 06:59:22 am »

nice bow pappy!! always great to hear of someone salvaging and breathing new life into their broken bows. Way to go and awesome tiller!

-josh

DCM · « **Reply #8 on:** July 30, 2009, 06:59:58 am »

A takedown sleeve might extend the lenght of the handle and consequently the lower limb. So a little extra tiller, and nock point height would be necessary at least from the geometry pov. Aside from that asymetry, inherent in virtually every bow, it looks dandy to me. Folks seem to really favor a little less round tiller, and I agree if the wood can handle it. I base 90% of the tiller shape on how it shoots and where or whether it takes set from more extensive shooting. How it looks is more or less just a starting point.

Dano · « **Reply #9 on:** July 30, 2009, 07:30:12 am »

I agree with David, I think

seriously it looks great Pappy, shoot her in!!

adb · « **Reply #10 on:** July 30, 2009, 08:06:22 am »

Very nice, Pappy! I'd have to agree, I think the bottom limb is a bit stiff at midlimb.

knightd · « **Reply #11 on:** July 30, 2009, 08:36:56 am »

That is a sweet looking bow there Pappy..

OldBow · « **Reply #12 on:** July 30, 2009, 09:25:39 am »

Great recycling project there.

Jesse · « **Reply #13 on:** July 30, 2009, 04:02:56 pm »

Looking good Pappy

DirtyDan · « **Reply #14 on:** July 30, 2009, 08:02:45 pm »

Good job as usual, Pappy. Where did you get the sleeve?

Dan

Primitive Archer