« previous next »
Pages: 1 ... 10 11 [12] 13 14 ... 99

Author Topic: 2012 PA Bow Trade - Works In Progress  (Read 449457 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,523
Re: 2012 PA Bow Trade - Works In Progress
« Reply #165 on: February 06, 2012, 06:45:05 pm »
Sweeping the floor stirs up too much dust!  ;D   ::)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: 2012 PA Bow Trade - Works In Progress
« Reply #166 on: February 06, 2012, 06:46:08 pm »
Quote from: Pat B on February 06, 2012, 06:45:05 pm
Sweeping the floor stirs up too much dust!  ;D   ::)

Also gives you something soft to cushion the falls.  ;D ;D
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Lee Slikkers

  • Member
  • Posts: 1,545
Re: 2012 PA Bow Trade - Works In Progress
« Reply #167 on: February 06, 2012, 07:59:32 pm »
Since my ideas of a Surprise Sassafrass bow ended with that knot midlimb I decided to bite the bullet and try this Apple sapling stave I've had drying for a year+  Here she is prior to cutting out the top profile, plenty of branch/knot areas to work around so this one will test my skills (or the lack there of)

She is 68" tip to tip...1 3/4" at the fades to a 1/2" at the tips.



Closer shot of some of the "goodies"


Some shots after the profile cut...






Carry on...
Logged
~ Lee

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"The last word in ignorance is the man who says of an animal or plant: 'What good is it?"
— Aldo Leopold
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Offline wildcat hunter

  • Member
  • Posts: 91
Re: 2012 PA Bow Trade - Works In Progress
« Reply #168 on: February 06, 2012, 08:01:30 pm »
Less than a week - NOT, I had the bow almost done, just waited for a name and the details. Besides, I'm retired. I put Danish oil on for the finish, water resistant - ""Not Shiney"", apply 2 coats  and wipe residue off after a period of time.
Logged

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: 2012 PA Bow Trade - Works In Progress
« Reply #169 on: February 06, 2012, 08:05:46 pm »
Good looking stuff so far...im starting to question my choice of stave ...na, so far I have removed more than a quarter of a century of growth rings and might have found the back.oh ya 25+ one by one because of multiple pin knots the wood rips when you try to make good time.this one may take a while...sorry xxxxxxx it wont get sent out this week ;)
Logged
Is this bow making a sickness? or the cure...

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: 2012 PA Bow Trade - Works In Progress
« Reply #170 on: February 06, 2012, 08:35:07 pm »
Well my first stave choice was J-U-N-K. It had severe wind checks that couldnt be gotten around! I keep staring at this 12 month old red elm 1/2 log that wants to be a bow. I stink I may go after that one next.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline sharpend60

  • Member
  • Posts: 355
Re: 2012 PA Bow Trade - Works In Progress
« Reply #171 on: February 06, 2012, 10:45:02 pm »
Glad I'm not the only encountering difficulties.
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,889
  • Eddie Parker
Re: 2012 PA Bow Trade - Works In Progress
« Reply #172 on: February 06, 2012, 10:51:01 pm »
I'm just trying to decide to complete one of three that is almost finished or, drag down a hackberry stave. ;D Doing that I will have to put off sinewing the yew bow I need to work on.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Knapper

  • Member
  • Posts: 1,057
  • David Atnip
Re: 2012 PA Bow Trade - Works In Progress
« Reply #173 on: February 07, 2012, 10:30:26 am »
Got the bark peeled off of an osage stave for******** last weekend. Ever since I've start building bows for family and friends its been just me and PA mag and bowyers bible. I would like to say its a privalge and an honor to build a bow for one of my peers! You guys build some beauties!!!
Logged
Ad Dare Servire
PM104250

blackhawk

  • Guest
Re: 2012 PA Bow Trade - Works In Progress
« Reply #174 on: February 07, 2012, 10:44:09 am »
Geez Lee...that apple staves like a slalom course...or like a cone course for cars  :laugh:...yup..you are sick for enjoying such staves.  ;)

My stave might not pan out either...it developed a couple lil checks on the belly for some weird reason,but the back is fine...sometimes I hate osage. Sometimes it does funny things on you for no reason,and says screw you. Ill dig a lil deeper on her and continue on cus it wont scare me away,and osage is tough stuff. Good thing I got a lot more wood and time on my hands if I don't like the way it turns out.
Logged

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: 2012 PA Bow Trade - Works In Progress
« Reply #175 on: February 07, 2012, 10:53:51 am »
Drums:  Was that JUNK stave, one of the those we traded for?  If so, I'll make good on it.
Logged
Matt Wirwicki
Owosso, MI

Offline paulsemp

  • Member
  • Posts: 1,918
Re: 2012 PA Bow Trade - Works In Progress
« Reply #176 on: February 07, 2012, 05:43:57 pm »
It seams i am not the only one with a ugly osage stave for a trade bow. 70 " long. Down to a ring, that it for today.
Logged

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: 2012 PA Bow Trade - Works In Progress
« Reply #177 on: February 07, 2012, 06:18:15 pm »
Nope, I have one too.  Looks like you're making good progress.

I'm home from work sick with a cold, but I finally got stir crazy and went out and chased a growth ring around a very persnickety knot.




I hate it when the wood dives into a knot and on this one both the back and belly do it.  I spent 4 times as much time doing that knot as I normally would take to chase the entire back.  It's inboard of the recurved tip about 8".  There's no chance I'll get it to bend there.  And I still have the rest of the back to chase the ring on.

George
Logged
St Paul, TX

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: 2012 PA Bow Trade - Works In Progress
« Reply #178 on: February 07, 2012, 06:22:20 pm »
That looks like a fun piece to work on.
Logged
I started out with nothin' and I still got most of it left

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: 2012 PA Bow Trade - Works In Progress
« Reply #179 on: February 07, 2012, 06:23:22 pm »
Maybe we should rename this trade? The 'Gnarly Stick Swap -2012'.  :o :o :laugh:
Logged
Bowmakers are a little bent, but knappers are just plain flaky.
Pages: 1 ... 10 11 [12] 13 14 ... 99
« previous next »