Made this one for Marlon. The stave I got from Matt Edwards last year. It was still green so I let it dry for awhile. It developed some sideways bend as it dried so I had to use some dry heat on it. I also set the wood at the tips by bending them sideways and holding them that way for a few days. The string still lies to one side but this makes for a fully center shot bow. The ERC is pretty low in density for making heavy bows, the bow fills the hand. The bow is about 78" N to N, just under 1 3/4" wide by 1 1/4" thick. A good handfull. It pulls about 120# @ 31". Here's a few pics
This is about as far as I can pull the bow.
Here is a full draw picture as I was tillering the bow using a 2 hand pull.