Author Topic: making a bow for a friend  (Read 7071 times)

0 Members and 1 Guest are viewing this topic.

Offline bradsmith2010

  • Member
  • Posts: 5,187
making a bow for a friend
« on: November 18, 2017, 01:10:35 pm »
well I am trying to pick the right stave,, I think they would all work,, but you know how it is,, each one has its own issues,,
all beautiful,, but challenging,, I got the evil band saw tuned up,, and ready to rough one out,, (SH)

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: making a bow for a friend
« Reply #1 on: November 18, 2017, 01:25:19 pm »
My pick would be the one on the far left , the one on the far right you would have to make some crooket arrows for 🙄
If you fear failure you will never Try !

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: making a bow for a friend
« Reply #2 on: November 18, 2017, 01:29:17 pm »
i think you are right, maybe I should keep that one for myself,, (--)

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: making a bow for a friend
« Reply #3 on: November 18, 2017, 01:46:25 pm »
If it were me, it would depend on how good of a friend it was. For a best bud I'd go with the far left, but if it were a casual acquaintance I go 2nd from the right.  ;)

Keep us posted  (-P
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: making a bow for a friend
« Reply #4 on: November 18, 2017, 02:08:31 pm »
u guys crack me up, but thats how I figure it too,,

Offline Hawkdancer

  • Member
  • Posts: 5,039
Re: making a bow for a friend
« Reply #5 on: November 18, 2017, 10:27:28 pm »
I like the far left #1, then count in to #4 & #5.  But I don' really have experience picking staves!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline Jim Davis

  • Member
  • Posts: 1,349
  • Reparrows
    • Reparrows
Re: making a bow for a friend
« Reply #6 on: November 18, 2017, 10:31:32 pm »
All I say is the one on the far right would be my last choice...
Jim Davis

Kentucky--formerly Maine

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: making a bow for a friend
« Reply #7 on: November 19, 2017, 08:35:31 am »
Well who is the Winner Brad ? Far right would not win any beauty contest for sure !
If you fear failure you will never Try !

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: making a bow for a friend
« Reply #8 on: November 19, 2017, 12:16:15 pm »
well I got pretty busy so I am still pondering,, thats part of the fun for me,, )P(

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: making a bow for a friend
« Reply #9 on: November 19, 2017, 01:52:44 pm »
Brad, I'd say the second from the left. Looks like it already has the back profile done or almost so.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: making a bow for a friend
« Reply #10 on: November 19, 2017, 01:54:16 pm »
I am leaning toward this one,
pretty knot free
pretty straight,, the growth rings are big and some dont like that, but this is gonna be a low stress design,,long and about 40ish draw,,
sometimes there are unseen issues with even the best looking staves,, so after I take off some wood will see how she looks,, and I hope to do that now,,
you can see there is some sapwood on the back, I will go down below that and work to a nice ring,, I was gonna say that its gonna be easy with the thick rings but then thought better of saying that,, cause you never know,,, :)

this bow gonna just be a simple long bow,, 66 ish long drawing to 40ish,,at 28,, nothing fancy, ,but I am going to do my best to get some nice cast and little set,,

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: making a bow for a friend
« Reply #11 on: November 19, 2017, 01:55:16 pm »
you were posting when I did,, I think thats the one I am gonna start and see,, its hard to tell from the photos I know,, sorry Pat I got the backwards, the one you are talking about is pretty long, and I am not sure I want to cut that one down,, it will probably sit until I figure that out,,

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: making a bow for a friend
« Reply #12 on: November 19, 2017, 02:14:11 pm »
That one has some thick early wood to wow those are thick rings   (-P
If you fear failure you will never Try !

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: making a bow for a friend
« Reply #13 on: November 19, 2017, 03:22:04 pm »
you are right,, I will just watch it real close,, as far as the set goes,, and see what happens,, since my friend does not know I am making a bow, I can always start over,, but I have a feeling it gonna be ok,,  (W

Offline Yard Dog

  • Member
  • Posts: 64
Re: making a bow for a friend
« Reply #14 on: November 19, 2017, 11:44:41 pm »
4  or 5....