Author Topic: Persimmon flatbow, 50# at 26"  (Read 5584 times)

0 Members and 2 Guests are viewing this topic.

Offline bentstick54

  • Member
  • Posts: 769
Re: Persimmon flatbow, 50# at 26"
« Reply #15 on: December 10, 2017, 07:29:58 pm »
Looks real good to me too. I like the looks of persimmon.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Persimmon flatbow, 50# at 26"
« Reply #16 on: December 10, 2017, 09:06:29 pm »
Nice Kyle.  :OK
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Chief RID

  • Member
  • Posts: 684
Re: Persimmon flatbow, 50# at 26"
« Reply #17 on: December 11, 2017, 06:51:58 am »
I really like the looks of that bow. Great job of finish and tiller, I think. The accents are functional and provide good contrast. Thanks for sharing.  Wish I could borrow your brain for a day or two and finish this sassafras thing I am stuck on. What diameter log was that bow from? Does the back have a lot of crown?

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Persimmon flatbow, 50# at 26"
« Reply #18 on: December 11, 2017, 07:09:55 am »
Nice work on the persimmon bow.Don't see them very often.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: Persimmon flatbow, 50# at 26"
« Reply #19 on: December 11, 2017, 09:11:29 am »
Good looking bow, Kyle. Hard to find a straight piece of Persimmon.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Mo_coon-catcher

  • Member
  • Posts: 1,347
Re: Persimmon flatbow, 50# at 26"
« Reply #20 on: December 11, 2017, 10:17:07 am »
Thanks guys!
In liking working with this wood. This is my third bow from the tree. It's sort of different, it's a dense hard wood, but seems to take more material than it should to keep set low. So all them I've built have a good cast o them but it comes with a little thud from the extra limb mass. It's nothing severe, but it is noticeable. I got lucky with this tree. It was about 12" diameter and split out almost perfectly straight. So they have a pretty flat back. I ended up wth about 20 good staves. About half a dozen ate very straight and clean for about 80". So there's a little pile of warbows in there. I may be willing to trade one of those for a decent yew stave. That'll be about the only way I think I'll part with the long and straight staves, as I doubt I'll come across more very easily.

Kyle

Offline Jedi45

  • Member
  • Posts: 17
Re: Persimmon flatbow, 50# at 26"
« Reply #21 on: December 11, 2017, 10:31:38 am »
Good looking bow! And good on ya working around those knots! I just learned how easily they can break a bow  (--)

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Persimmon flatbow, 50# at 26"
« Reply #22 on: December 11, 2017, 11:20:45 am »
Nice work Kyle

Offline Hans H

  • Member
  • Posts: 420
Re: Persimmon flatbow, 50# at 26"
« Reply #23 on: December 11, 2017, 01:05:23 pm »
well done, nice bow
Hans
Hans,      Bavaria, Germany

Offline Stickhead

  • Administrator
  • Member
  • Posts: 940
Re: Persimmon flatbow, 50# at 26"
« Reply #24 on: December 11, 2017, 02:30:32 pm »
Good looking bow!  Nice tiller.

Offline ntvbowyer1969

  • Member
  • Posts: 322
Re: Persimmon flatbow, 50# at 26"
« Reply #25 on: December 12, 2017, 12:36:07 am »
good looking bow. I have yet to try persimmon.

Offline sleek

  • Member
  • Posts: 6,740
Re: Persimmon flatbow, 50# at 26"
« Reply #26 on: December 12, 2017, 05:42:16 am »
Thanks guys!
In liking working with this wood. This is my third bow from the tree. It's sort of different, it's a dense hard wood, but seems to take more material than it should to keep set low. So all them I've built have a good cast o them but it comes with a little thud from the extra limb mass. It's nothing severe, but it is noticeable. I got lucky with this tree. It was about 12" diameter and split out almost perfectly straight. So they have a pretty flat back. I ended up wth about 20 good staves. About half a dozen ate very straight and clean for about 80". So there's a little pile of warbows in there. I may be willing to trade one of those for a decent yew stave. That'll be about the only way I think I'll part with the long and straight staves, as I doubt I'll come across more very easily.

Kyle

Kyle,  in my experience, persimmon likes a crowned back as its tension strong. I have made only 3, and they were saplings with a high crown. Perhaps the set and high mass you are dealing with can be remedied by allowing a more crowned back to reduce comoressjon on the belly, allowing also for mass reduction?
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Selfbowman

  • Member
  • Posts: 3,115
Re: Persimmon flatbow, 50# at 26"
« Reply #27 on: December 12, 2017, 09:44:54 am »
Well done Kyle. Arvin
Well I'll say!!  Osage is king!!

Offline Parnell

  • Member
  • Posts: 5,556
Re: Persimmon flatbow, 50# at 26"
« Reply #28 on: December 13, 2017, 12:02:43 pm »
Looks like some pretty wood.  Never touched a piece of Persimmon before.
1’—>1’

Offline Mo_coon-catcher

  • Member
  • Posts: 1,347
Re: Persimmon flatbow, 50# at 26"
« Reply #29 on: December 13, 2017, 12:15:03 pm »
On the next flatbow I do from it I may give trapping the back a shot and see how it goes. Worst that'll happen is I break it. Or it'll turn out even better. It seems to take similar set on the rounded bellied ELB I tried this last spring. A smidge over an inch and it pulled 60# but was very long between the nocks. I've got some more experimenting to do it think.

Kyle