Exactly. Anything I can do to keep what's in my head straight.
![Grin ;D](http://www.primitivearcher.com/smf/Smileys/default/grin.gif)
At this point in the build the staves edges have been sharp.
![](https://i.imgur.com/HjmI0eQ.jpg)
so from now on I'll be sure the edges on the back will be eased a bit by slightly rounding it
![](https://i.imgur.com/4XAO5KI.jpg)
initially I had planned to use the stave as is without heat corrections but I decided otherwise. Clamped to the caul you can see how far out this limb is
![](https://i.imgur.com/9rr6B93.jpg)
so as I always do I coated the belly with cooking oil
![](https://i.imgur.com/qXo2zoF.jpg)
Got my clamps and small luan plywood clamp pads standing by and started heating at the fades. to get the limb over enough I place a small pad to use as the fulcrum for the initial bend
![](https://i.imgur.com/QgvMtKO.jpg)
I used the wooden clamp to pull the limb around
![](https://i.imgur.com/XlV8VCZ.jpg)